news

Different Cosmetic Bottles Containers For Different Applications

Update:26-01-2020
Summary:

The Cosmetic Bottle Manufacturer Airless bottle product […]

The Cosmetic Bottle Manufacturer Airless bottle production process consists of a cap, a shoulder cap, a vacuum pump and a piston. Use according to air pressure. The tip of the nozzle with the nozzle is pointed, and the flat end of the duckbill is covered with a layer of plastic.

 

Commonly used in cosmetic containers, thicker cream bottles, caps, plugs, gaskets, pump heads, injection-molded dust covers; PET blow bottles for two-step molding, injection molding tube blanks, for blowing Finished packaging. Other lotion bottles, such as thinner containers and wash bottles, are blown bottles.

 

 

PET material is an environmentally friendly material with high barrier properties, light weight, non-breaking characteristics, chemical resistance and strong transparency. They can be made pearlescent, colored, magnetic white and transparent. They are widely used in gel water installations.

 

 

The lotion bottle consists of a cap, a shoulder cover, a lotion pump and a piston, and most are equipped with a hose inside. Mainly outside acrylic, inside PP material. The cover is out of acrylic ABS.

 

 

The internal components of the perfume are glass exterior aluminum, PP bottle, glass drip. The inner lining of the perfume is mainly glass and PP. Using large-capacity glass, PP is suitable for short-term storage with small capacity due to long storage time. Most PCTA and PETG have no perfume. Inside the aluminum-plastic hose, the PE material is made of aluminum. And offset printing. Cut and rewind. According to tube head, round tube, flat tube and oval tube.

 

 

Acrylic material is an injection-molded bottle, which has poor chemical resistance. Generally, solder paste cannot be directly pasted. It needs to be equipped with a lining partition. The filling should not be too full to prevent the solder paste from entering between the lining and the acrylic bottle. The requirements for packaging during transportation are very high. It looks particularly obvious after scratching, has high permeability, and the upper wall is thick, but the price is quite expensive.

 

 

As a professional cosmetics bottle manufacturer and supplier in China. For all product packaging, from square bottles to PP bottles, Ningbo RuiChang Commodity Packaging Co , Ltd . aims to make your    Cosmetic Bottles    easy to use every day, thereby protecting the contents from contamination and chemical changes.

https://www.ruichangpacking.com